Datalogic Reader Matrix-1000 Uživatelský manuál stáhnout pdf

LT-300 RING

LIGHTING SYSTEM

FOR MATRIX FAMILY READERS

DESCRIPTION

The LT-300 Ring Lighting System is designed for reading codes

produced by Dot Peening or Laser Etching on flat, reflective parts and

particularly in applications where reading is performed from

underneath. It provides a very uniform light source on a wide area.

MECHANICAL DIMENSIONS

149

[5.87]

[0.59]

27.7

[1.09]

Ø99

[Ø3.90]

WIRING

Wire Color CBX/Matrix Signal Meaning

Brown Vdc 10 to 30 Vdc

Black GND Ground

Yellow Green Earth Earth Ground

Blue O1-, O2-, (O3-) Control Signal -

White O1+, O2+, (O3+) Control Signal +

CAUTION

The LT-300 control signals must always be

connected to one of the Matrix Digital Output

signals. In VisiSet™, set the relative Output Line

Function parameter to "External Lighting System" and

the Matrix Output x External Lighting System Mode

parameter to "Triggered".

PACKAGE CONTENTS

The LT-300 package contains the following items:

 LT-300 Ring Lighting System with adapter bracket

 (2) Mounting brackets (for Matrix-2000 90º Reading Window

models only)

 (4) M2.5 countersunk screws for Matrix-1000/2000™ Direct

Window bracket mounting to ring

 (4) M4 screws for bracket mounting to reader

 (4+4) M2.5 locking and flat washers for bracket mounting to LT-

300 Ring

 LT-300 Ring – CBX connecting Cable

 Instruction Manual

90° READING WINDOW MOUNTING Matrix-1000/2000™

NOTE

For this application, the adapter bracket must be

removed from the LT-300 Ring before mounting the

90° brackets. Reuse the 4 M2.5 screws for mounting.

1. Mount the two brackets A onto the LT-300 lighting ring B re-using

the 4 M2.5 screws and the washers in the package.

2. Mount the reader C onto the lighting ring assembly aligning it

correctly to the holes. Use the 4 M4 screws in the package.

3. Insert the cable plug into the ring’s connector, correctly observing

the positioning key, and then lock it safely by tightening the

threaded locking ring.

4. Wire the LT-300 to the CBX according to the Wiring table.

5. Position the Matrix assembly over the code reading area at the

correct Focus Distance for your model, (described in the Matrix

Reference Manual under "Reading Features").

DIRECT READING WINDOW MOUNTING Matrix-1000/2000™

The following parts are required for mounting:

 LT-300 Ring Lighting System

 BK-510 Bracket

1. Mount the BK-510 bracket A onto the LT-300 Ring adapter bracket

B using the 4 M2.5 screws and the washers in the package.

2. Mount the reader C onto the lighting ring assembly through the

positioning slots on the brackets. Use the 4 M4 screws in the

package.

3. Insert the cable plug into the ring’s connector, correctly observing

the positioning key, and then lock it safely by tightening the

threaded locking ring.

4. Wire the LT-300 to the CBX according to the Wiring table.

5. Position the Matrix assembly over the code reading area at the

correct Focus Distance for your model, (described in the Matrix

Reference Manual under "Reading Features").

[inch]

1 2

Shrnutí obsahu

Strany 1 - FOR MATRIX FAMILY READERS

LT-300 RING LIGHTING SYSTEM FOR MATRIX FAMILY READERS DESCRIPTION The LT-300 Ring Lighting System is designed for reading codes produced by Dot

Strany 2

POSITIONING Matrix-1000/2000™ code surface Focus distance = α + β For 90° reading window applications, position the Matrix assembly over the co

Další dokumenty pro Sítě Datalogic Reader Matrix-1000

Zobrazit dokument Datalogic Reader Matrix-1000 Instalační manuál

Datalogic Reader Matrix-1000 Instalační manuál (67 stránky)

Zobrazit dokument Datalogic Reader Matrix-1000 Uživatelský manuál

Datalogic Reader Matrix-1000 Uživatelský manuál (2 stránky)

Datalogic Reader Matrix-1000 Uživatelský manuál (82 stránky)

Komentáře k této Příručce

Žádné komentáře

Datalogic Reader Matrix-1000 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Sítě Datalogic Reader Matrix-1000. LT-300 RING LIGHTING SYSTEM FOR MATRIX FAMILY READERS [en] Uživatelská příručka

Shrnutí obsahu

Další dokumenty pro Sítě Datalogic Reader Matrix-1000

Komentáře k této Příručce

Související produkty a manuály pro Sítě Datalogic Reader Matrix-1000