Datalogic POWERSCAN PBT7100 guide Manuál s instrukcemi stáhnout pdf (Strana 106)

Bluetooth Features

5-6 PowerScan® 7000BT SRI

ACK Timeout

ACK Timeout configures a duration, selectable in 200-millisecond

increments, for the scanner to wait for the Base Station to accept the data

and respond with an ACK (acknowledge) or NAK (when data is in

error).

Upon expiration of the timeout, the scanner will emit a transmission

error beep and return to its normal operating mode.

START/END

MODE BAR CODE

Sets the ACK Timeout using a decimal value from

000 to 255. Settings are in 200 millisecond incre-

ments. A setting of 000 disables the timeout.

To configure this feature, scan the “START/END” bar

code above to place the unit in Programming Mode,

then the “Set ACK Timeout,” followed by the three

digits (zero padded) from the Alphanumeric table in

Appendix C, Alpha-Numeric Pad representing

your setting. Exit programming mode by scanning the

“START/END” bar code above.

SETTINGS EXAMPLES:

000 = Wait Forever

007 = 1.4 seconds

158 = 31.6 seconds 255 = 51 seconds

DEFAULT SETTING FOR THIS FEATURE:

000 (Disable)

Set

ACK Timeout

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 271 272

Žádné komentáře

Datalogic POWERSCAN PBT7100 guide Manuál s instrukcemi Strana 106